You are here: How Much Does an Automatic Riveting Machine Cost? 2026 Selection and Quotation Reference - BISUDI
What home-appliance housing, aluminum-profile case, stainless kitchenware, hardware-furniture and battery-tray makers ask most is "how much on earth does an automatic riveting machine cost". Such equipment is mostly non-standard customization with no nationwide uniform price, and the quotation varies with pulling force, number of gun heads, feeding and error-proofing configuration, body form and robot integration. Using 2026 market figures, this article explains the quotation structure, configuration differences by industry workpiece and the per-station payback calculation, so purchasing can compare horizontally without being misled by low-price low-configuration offers.
I. What the quotation mainly consists of
| Cost/Configuration | Impact on Total Price | Procurement Focus |
|---|---|---|
| Main-unit pulling force and spec | Clear price gap between small Ø2.4-3.2 specs and high-force Ø4.8-6.4 models | Stainless kitchenware and hardware square tubes should reserve a high-force margin |
| Single gun or one-out-of-two dual gun | A dual gun allows two-person opposing riveting with nearly doubled capacity, priced above a single gun | Home-appliance and cabinet batch lines should first calculate dual-gun payback |
| Feeding and error-proofing functions | Missing-nail detection, point counting, in-position prompt and IO wiring are value-added items | Peak-season night-shift lines with many missed rivets are worth equipping with counting |
| Body form | Handheld saves the most budget; tabletop, suspended, in-line and robot rise step by step | Choose by station space and automation stage; going all-in at once is unnecessary |
| Non-standard and integration | Special nozzles, fixtures, robot and line integration are priced by workload | Aluminum-profile slots and high-appearance panels need separate nozzle fixtures |
II. Different industry workpieces have different configuration priorities
| Typical Workpiece | Common Configuration | Configuration Rationale |
|---|---|---|
| Home-appliance housings and brackets | One-out-of-two dual gun plus scratch-resistant nozzles | Dense points on color-coated/sprayed faces, focusing on indentation prevention and cycle |
| Aluminum-profile cases and cabinets | Fast-feed handheld machine plus aluminum-part nozzles | Frequent multi-variety changeover; slot feeding must be smooth |
| Stainless kitchenware, hardware furniture | High-force model above 12,800N | Stainless steel, square tubes, mixed large and small specs |
| Battery trays, automotive structural parts | In-line counting or robotic riveting workstation | High requirements on consistency, error-proof traceability and force records |
III. Calculate the account down to the specific station
Auto feeding runs about 80/minute and one machine replaces about 3 riveting workers. By the labor and two-shift figures of home-appliance and metal-processing workshops, an assembly line originally staffed with 4 riveting workers usually needs only 2 to mind the machine after switching to dual-gun equipment, and most lines recover the equipment investment in 2-6 months - the larger the volume and the more night shifts, the faster the payback. When comparing prices, don't look only at the bare-machine price; ask five things clearly at once: whether on-site installation/commissioning and operation training are included, how many years the whole-machine warranty is, wear-part unit prices and lead times, how special nozzles/fixtures are charged, and whether the on-site trial is free.
Five Procurement Steps
- 1 Organize specsTally the past three months' rivet specs, plate thickness, per-machine rivet points and daily capacity
- 2 Send drawings for initial selectionThe maker gives a handheld, dual-gun or robot solution and price range by workpiece
- 3 On-site samplingBring a machine to the plant to measure cycle, pulling force and yield on real orders
- 4 Station accountingCalculate labor savings and payback cycle by measured cycle and local labor
- 5 Transparent signingSign only after confirming the configuration list, warranty, parts, lead time and training
IV. Three common quotation traps in procurement
First, comparing only the bare-machine price and ignoring the long-term cost of nozzles, wear parts and on-site service; second, choosing a low-force model to cut price for stainless steel and large-spec rivets, leading to frequent faults within months; third, ordering directly without a trial and only discovering poor feeding or panel bruising after delivery. The safe approach is to first send rivet specs and workpieces, then book a free on-site trial and decide with measured data. Further reading:Free On-Site Trial Policy and Process、Automatic Riveting Machine Buying Guide (Full)。
FAQ
Yes; tell us the rivet spec range, workpiece type and expected output, and a tier-matched solution and price range can be given in about 10 minutes, with the final configuration subject to trial confirmation.
Common standard models are in stock and can ship nationwide quickly; non-standard dual-gun, in-line or robotic workstations are scheduled by solution, with lead time written into the quotation and contract.
Nationwide customers: send specs and workpieces for a price range
Send the rivet specs, panel process and capacity to the engineer, who can bring a machine to the factory for on-site sampling - trial first, decide later.
Previous 
