You are here: Enclosures / Slides & Hinges Riveting Solutions
Appliance, Kitchen/Bath & Hardware Furniture Automatic Riveting Machine · Enclosure / Slide & Hinge Riveting Solutions
Air conditioners, refrigerators, water heaters, microwave ovens, range hoods and cooktops, small-appliance enclosures and brackets, stainless kitchen/bath parts, metal furniture and slides/hinges have extremely many riveting points and widely use coated, color-coated, anodized and thin stainless panels, where scratch protection of visible surfaces and high-cycle error-proofing are the core demands. BISUDI provides appliance-grade scratch-proof riveters, dual-gun riveting machines and high-cycle models for small hardware parts, auto-feeding at about 80/min, with free on-site trials for appliance and hardware-furniture enterprises nationwide.
Appliance & Furniture Workpiece Selection
| Workpiece | Joining Features | Recommended Model |
|---|---|---|
| AC / refrigerator / water-heater enclosures | Coated/color-coated sheet, dense points | One-to-two dual gun + nylon nozzle |
| Microwave ovens, hoods/cooktops, small appliances | Small rivets, high appearance grade | Bench-top / suspended small gun head |
| Stainless kitchen/bath parts | Stainless steel, rust-proof | Stainless-specific high-force model |
| Metal furniture, slides & hinges | Small parts, fast cycle | High-cycle small-gun-head / dual-gun model |
Appliance-line Efficiency Comparison
| Item | Manual riveting | Auto-feed riveting |
|---|---|---|
| Per-point action | Fetch, align, set rivet | Align and trigger, two steps |
| Appearance quality | High risk of scratches/indentations | Scratch-proof nozzles, consistent rivets |
| Miss-rivet control | Visual check, high night-shift risk | Count to target, incomplete alert |
| Labor | Relies on skilled workers, high turnover | One machine ≈ 3 workers, novice-operable |
Solution Highlights
High-appearance appliance parts prioritize scratch-proof nozzles and counting error-proofing; stainless kitchen/bath parts use stainless-specific models; small hardware such as slides and hinges use high-cycle small-gun-head models; thick-tube metal furniture uses high-force models.
Hinge and slide lines long relied on skilled manual riveting, and night-shift missed rivets caused whole-batch returns. After introducing 4 bench-top small-gun-head riveters with counting, one operator could run 2 machines, cycle time stabilized, missed rivets fell to zero, labor cost dropped by about half, and the plant passed the downstream appliance customer's system audit.
FAQ
Choose nylon/chrome-plated contact parts and control stroke and force; during the trial we verify with same-process panels that there are no indentations before finalizing, and use fixtures to isolate the load-bearing area on high-appearance surfaces.
Auto-feed runs at about 80/min and one machine replaces about 3 workers; you can first run a machine on the busiest line to sample and measure cycle and yield, then decide model and quantity.
Yes - choose high-cycle small-gun-head models for consistent rivets and counting error-proofing; add a high-force model for thick-tube metal furniture. On-site trials are available nationwide.
Related:One-to-two dual-gun riveter · Automatic Riveting Machine · Sheet-metal · Stainless-steel Solutions
Appliance / kitchen / hardware-furniture customers: book a trial
Provide appliance enclosures, kitchen/bath parts or hardware-furniture samples, panel process and rivet specs; an engineer will come on site to verify scratch protection and cycle rate.
Service Process
- 1. Process ConfirmationMaterial, plate thickness, joint points and appearance requirements
- 2. On-site TrialEngineer brings a matched model to your factory for sampling
- 3. Threads / Error-proofingVerify rivet nut and counting-IO solution
- 4. Line IntegrationBench-top / suspended / in-line / robotic mounting
- 5. Spare Parts SupportFull set of nozzles, 1-year warranty, factory-stocked parts
